Adjustment(05032012)

a little lump in the middle

forward part seems little unfair because of the mistake on frame 0,1,2

take out, shift, adjust the frames

looks like a boat

deck frames and some loftings

the deck frame

hull frames and temporary spalls

a brace through a frame

neat

line up!

Andrew deep ripping

the first planking goes on to where it has to be

the first planking

our work so far

planking

feed in, tale out

what is that? maybe a big fire in that year

a black annual ring split the plankng into two

Chris reminded us last week, the concept and rough sequence of building this boat this morning. One other thing that he told us is that he recommend a free program naming gantter which is capable of making gant chart and he shared his file to some students having a laptop with them, talking about project management as well. The first mission today was the deep ripping. The timber that Lance and I skimmed last week was deep ripped and while one team was doing that the other team with Chris dressed those planking. Some of those planking has a splitable black annual ring which I reckon there was a big fire in that year, but I should have asked Christ anyway. We sat two plankings one of which is on the chine and the other one is sat in the middle of the chine and keel and it needs tiny bit tension up side to make the other plankings sit easily. When one of them sat properly, use bevel and sort out the angle between the first planking and it so that they have the same angle. We actually made a mistake on the frame 0,1,2 which have to be infront of the station line, but they weren't so we redo them. It wasn't a big deal that the first planking became a bit short.

tomorrow
scarphing
topside lofting

wednesday
planking finished

by next wednesday
glass inside the hull

A rib(sometimes there is a ring frame) is going through gunnel to gunnel whereas the floor goes on partly(partial stiffener).

collision bulkhead 8mm higher density
mast bulkhead 15mm
cockpit bulkhead 8mm light density

cockpit sole embracing the upper side of  the centre case is filled with rubber epoxy on the side of joing.